HOOF ULTRABLOCK PLASTIC GREEN

Color-coded hoof Ultrablocks make it easier to find the right one. They feature a measuring line, eliminating the need for a separate mixing cup and improving blocking efficiency. The added thickness and angled toe design help reduce stubbing of the cow’s toe or catching of the block.

For adhesive: Mix powder and liquid in a well-ventilated area. Pour liquid to the line in the mixing toe, then add about 50 grams of the powder. Do not fill the toe; leave extra room for mixing.

Push the powder into the liquid, then mix quickly. Slide a wood block into the mixing toe and pull the mixture three-quarters of the way onto the block, exposing about an inch of the block.

Quickly apply a block to good claw using mixing toe to guide around the hoof. Leave about 3/16 inch of glue between the claw and block. Use the mixing toe to smooth excess glue around the claw to help hold the block.

Give the adhesive time to dry and harden (2 to 3 minutes) before lowering the foot to the ground. Release the hoof quickly, allowing the cow to put weight entirely on the block. Let the animal adjust its weight to the block for a few seconds to ensure it stays on. Release the cow from the holding chute.

Remove in 6 to 8 weeks to eliminate the risk of over-burdening the ‘healthy’ claw.